An AMH test is a blood test that measures anti-Müllerian hormone to estimate the number of eggs remaining in a woman's ovaries. Doctors mainly use it to assess ovarian reserve and predict how the ovaries may respond to fertility treatment. The test requires little preparation, can usually be done on any day of the menstrual cycle, and cannot determine by itself whether someone can become pregnant.
What Does an AMH Test Measure?
AMH stands for anti-Müllerian hormone. In women of reproductive age, this hormone is produced by cells in small developing follicles in the ovaries. These follicles contain immature eggs.
The amount of AMH in the blood provides an estimate of ovarian reserve, which refers to the remaining supply of eggs in the ovaries. As women age, the number of available eggs generally decreases, and AMH levels tend to fall.
Ovarian reserve describes the quantity of eggs, not their quality. Egg quality refers to the likelihood that an egg can develop into a healthy embryo after fertilization. An AMH test cannot directly measure this quality or establish whether pregnancy is possible.
According to MedlinePlus, AMH testing is commonly used alongside other fertility assessments to estimate ovarian reserve and help healthcare professionals plan fertility treatment.
Why Is an AMH Test Done?
A healthcare professional may recommend an AMH test for several reasons, particularly when assessing reproductive health or planning fertility treatment.
1. To assess ovarian reserve
One of the main reasons for ordering an AMH test is to estimate how many eggs remain in the ovaries. This information can help a fertility specialist understand ovarian reserve in relation to a woman's age and reproductive history.
A lower result may suggest diminished ovarian reserve, meaning the estimated number of remaining eggs is lower than expected. However, it does not mean that pregnancy is impossible.
2. To help plan IVF treatment
During in vitro fertilization (IVF), fertility medicines stimulate the ovaries to develop multiple mature eggs. AMH levels help doctors estimate how the ovaries may respond to these medicines.
This information can help a fertility specialist plan ovarian stimulation and discuss the expected number of eggs that may be collected. A lower AMH result may suggest a lower response, while a higher result may indicate a stronger response.
AMH is particularly useful for estimating the number of eggs that may be obtained during treatment. It is less useful for predicting whether those eggs will produce healthy embryos or result in a successful pregnancy.
3. To investigate possible PCOS
Polycystic ovary syndrome (PCOS) is a hormonal condition that can affect menstrual cycles, ovulation, and reproductive health.
Some women with PCOS have higher AMH levels because of differences in the number of small ovarian follicles. A doctor may consider an AMH result when assessing possible PCOS, but the result alone cannot establish the diagnosis.
Menstrual patterns, signs of increased androgen hormones, medical history, and other appropriate findings are also considered.
4. To assess certain ovarian conditions
AMH testing may also be used in selected situations to help investigate or monitor certain ovarian conditions. For example, it can help healthcare professionals monitor some AMH-producing ovarian tumors, including granulosa cell tumors, during treatment and follow-up.
5. To provide information about ovarian ageing
AMH generally decreases as the ovaries age. A doctor may consider the result when evaluating possible early loss of ovarian function or changes associated with the approach to menopause.
However, AMH cannot reliably predict the exact age when menopause will occur. It should not be used alone to determine how much time remains before natural pregnancy becomes impossible.
Who May Need an AMH Test?
An AMH test may be recommended for women who:
- Are undergoing an evaluation for infertility.
- Are planning IVF or another fertility treatment that involves ovarian stimulation.
- Have been advised to undergo ovarian reserve testing as part of fertility planning.
- Have findings that raise concern about diminished ovarian reserve.
- Are being evaluated for possible PCOS as part of a wider hormonal assessment.
- Have certain ovarian conditions that require AMH monitoring.
- Have symptoms or medical history that warrant evaluation for premature loss of ovarian function.
AMH testing is not necessary for everyone who is planning a pregnancy. It is also not a reliable general screening test for predicting whether a healthy woman with no known fertility problems will conceive naturally.
How to Prepare for an AMH Test
Preparing for an AMH test is generally straightforward. Most people do not need to change their usual routine before having the blood sample collected.
Do you need to fast before an AMH test?
No special preparation is usually required for an AMH test. Fasting is generally not necessary, so most people can eat and drink normally unless the healthcare professional or laboratory has given different instructions because of other tests being performed at the same time.
Do you need to take the test on a particular day of your period?
No. Unlike some other reproductive hormone tests, AMH levels are relatively stable throughout the menstrual cycle. Therefore, the test can generally be performed on any day, including during menstruation.
The American Society for Reproductive Medicine (ASRM) confirms that AMH can be measured at any point in the menstrual cycle. Some other hormone tests, such as follicle-stimulating hormone (FSH) and estradiol, may need to be measured during specific cycle days.
Should you tell your doctor about medications?
Yes. Inform your healthcare professional about all medicines and hormonal treatments you currently use. This includes hormonal contraceptives, such as birth control pills, injections, implants, and hormonal intrauterine devices.
Hormonal contraceptives may reduce measured AMH levels in some women. The ASRM advises that results should be interpreted with caution in people currently using these medicines.
Do not stop contraception or other prescribed medication simply to obtain an AMH test. Your healthcare professional can decide whether your medication history affects the interpretation of the result or whether any adjustment is appropriate.
What information should you share before testing?
Before the test, it can be helpful to discuss:
- Your age and menstrual cycle history.
- Any previous fertility assessments or treatments.
- Past ovarian surgery or relevant ovarian conditions.
- Current or recent hormonal medication use.
- The reason for testing, such as fertility evaluation, IVF planning, or investigation of a hormonal condition.
This information helps the healthcare professional interpret the laboratory result in the right context.
How Is the AMH Test Performed?
An AMH test is a routine blood test. It does not require surgery, an internal examination, or a special procedure involving the ovaries.
The test generally involves the following steps:
- Blood sample collection: A healthcare professional cleans the skin, usually on the inside of the arm, and inserts a small needle into a vein.
- Sample preparation: A small amount of blood is collected in a suitable test tube or vial.
- Laboratory testing: The sample is sent to a laboratory, where the AMH concentration is measured.
- Result review: The laboratory sends the result to the requesting healthcare professional for interpretation.
Blood collection usually takes only a few minutes. Some people experience a brief sting or mild discomfort when the needle is inserted. Slight bruising or tenderness at the collection site may occur, but serious complications are uncommon.
What Do AMH Test Results Mean?
AMH results provide information about ovarian reserve. However, their meaning depends on age, medical history, the reason for testing, and the laboratory's reference range.
Results are commonly reported in nanograms per millilitre (ng/mL), although some laboratories use other units. Always check the measurement unit and reference interval printed on your report before comparing results.
What does a low AMH level mean?
A low AMH level generally suggests that fewer small developing follicles are present in the ovaries. This may indicate diminished ovarian reserve, particularly when the result is lower than expected for the person's age.
Possible implications include:
- A smaller estimated supply of remaining eggs.
- A lower response to fertility medicines used during IVF.
- Fewer eggs potentially available for collection during ovarian stimulation.
- A need for further discussion about fertility treatment options and expectations.
However, a low AMH result does not mean that a woman cannot become pregnant naturally. Some women with low levels conceive without fertility treatment, while others may need assistance.
Low AMH also does not automatically mean that the eggs remaining in the ovaries are poor quality. The test measures an aspect of egg quantity rather than directly assessing egg health.
What does a normal or typical AMH level mean?
A result within the laboratory's expected range may suggest that ovarian reserve is consistent with its reference values. However, a typical result does not guarantee normal fertility or confirm that pregnancy will occur.
Other factors also affect the ability to conceive, including:
- Age and the quality of the eggs.
- Whether ovulation occurs regularly.
- The health and condition of the fallopian tubes and uterus.
- Sperm count, movement, and quality.
- Other medical or reproductive conditions.
Therefore, an AMH result should be considered alongside other relevant fertility findings rather than treated as a complete assessment of reproductive health.
What does a high AMH level mean?
A higher AMH level may indicate a larger number of small developing follicles in the ovaries. In some situations, it is associated with PCOS.
High AMH is not automatically a sign of better fertility. Although it may indicate a greater ovarian response to fertility medicines, it does not establish that the eggs are healthy or that natural conception will be easier.
When PCOS is suspected, a healthcare professional considers menstrual irregularities, signs of increased androgen activity, other test results, and relevant clinical findings before making a diagnosis.
What does a very low or undetectable AMH result mean?
A very low or undetectable result suggests that AMH-producing small follicles are present in very low numbers or cannot be detected by the laboratory's testing method.
Such a result may indicate markedly reduced ovarian reserve. In younger women, it may prompt further evaluation for possible premature ovarian insufficiency, especially when periods become irregular or stop.
However, a very low result does not establish that pregnancy is impossible, and it should not automatically exclude someone from fertility treatment. A specialist needs to interpret the finding alongside age, medical history, other hormone measurements, and ultrasound findings.
Are There Normal AMH Levels for Different Ages?
AMH levels generally rise during adolescence, reach higher levels in early adulthood, and gradually decline as ovarian reserve decreases with age.
Two women of the same age can have different AMH results. Therefore, a value that is expected in one age group may have a different meaning in another.
There is no single AMH number that defines good fertility for every woman. Laboratories may also use different testing methods and reference intervals, so numerical cutoffs should not be interpreted without considering the specific assay and clinical circumstances.
Age remains one of the most important factors when evaluating reproductive potential. The ASRM emphasizes that ovarian reserve testing should support, rather than replace, counseling based on age and the individual's medical and reproductive history.
Can an AMH Test Predict Whether You Will Get Pregnant?
No. An AMH test cannot reliably predict whether or when someone will become pregnant naturally.
Although AMH provides information about the estimated number of eggs remaining, it does not directly measure egg quality, confirm that ovulation is occurring, or assess whether sperm can fertilize an egg.
Similarly, a high AMH result does not guarantee a successful pregnancy, and a low result does not rule out natural conception.
According to the American Society for Reproductive Medicine's guidance on ovarian reserve testing, AMH and other ovarian reserve measurements are useful for estimating the number of eggs likely to be obtained during IVF stimulation. However, they are poor independent predictors of reproductive potential and pregnancy outcomes.
For this reason, fertility assessment may also involve menstrual and ovulation history, pelvic ultrasound, other hormone tests, examination of the reproductive organs when appropriate, and semen analysis.
How Long Does It Take to Get AMH Test Results?
The time required to receive AMH test results depends on the laboratory performing the analysis and how the sample is processed.
When a blood sample is sent to a laboratory, results may be available within a few days. Some laboratories may take longer, particularly when samples are processed at an external testing centre.
Your healthcare professional can explain the result, compare it with the appropriate laboratory reference range, and discuss whether additional tests are needed.
What Happens After Receiving Your AMH Results?
The next step depends on why the test was ordered and whether the result is consistent with other clinical findings.
During a follow-up appointment, your healthcare professional may:
- Compare your AMH level with age-related reference information.
- Review menstrual patterns and reproductive history.
- Consider FSH and estradiol measurements when appropriate.
- Recommend a pelvic ultrasound to assess the ovaries and antral follicle count.
- Discuss how the findings may affect an IVF stimulation plan.
- Investigate possible hormonal or ovarian conditions when indicated.
A single AMH result is often sufficient for an initial ovarian reserve assessment. Repeating the test at regular intervals is not routinely necessary to track ovarian ageing because short-term variations can occur and serial testing has limitations.
For someone experiencing difficulty becoming pregnant, the result should be included in a broader fertility evaluation. It should help guide informed decisions rather than determine treatment options on its own.